Old School Projects

[black start]

Are these guys easy to find? being seeing some top notch work from them...

If it's the guy with the rx8, he's on the main road in edinburgh. About 5 minutes heading south after mid centre mall

[Monk BANzai]

^^ yup..same guy (or so i heard) saw some work on a RX8 from arima side... looks OEM..but you can tell its after market... its that clean....

[cinco]

Siew? Top notch work he busy as fuark tho

[TriniGT]

Yup Siew is a busy guy you need to lock him down and follow-up but he is good, even does carbon resin work too.

As for the mediablaster, blasting a chassis and a body is entirely different, the chassis can take the courser media but you definitely need the walnut shells for the fenders and whatnot otherwise they will be warped-to-f@#k when done.

[WestIndian424]

does he do other media blasting? Walnut shells etc?

saw this today..dont know if it would be of any help..

http://www.trinicarsforsale.com/images/ ... es_big.jpg

[Sanctifier]

^ ^ ^ Thanks for the Heads Up Calor... Very helpful and great timing right now.

[WestIndian424]

^ ^ ^ Thanks for the Heads Up Calor... Very helpful and great timing right now.

no probs..I been viewing your posts on media blasting but for someone like me who was doing a one time job it was tough to buy all the equipment

[Sanctifier]

^ ^ ^ Yup, I have most of the equipment but I still need a full-sized diy booth (with extractor fan & filters) & air-lines etc.
The problem is TIME & Project $$$, especially when setting up a new business hopefully before late next year.

[nigie]

VAUX....REAL CAR

[MG Man]

looks like the one I used to see in Ste Madeline, years ago...nice car, loads of potential

[nigie]

looks like the one I used to see in Ste Madeline, years ago...nice car, loads of potential

doubt that this is the ste madeline car ...this car had a V8 in it....ugggggggh owner restoring it to original....with a newer Vauxhall 4 cylinder engine ...uggggh...feeling sick

[MG Man]

lmao
I hope he putting in a Z20LET
who pressed the floor panels?

[nigie]

lmao
I hope he putting in a Z20LET
who pressed the floor panels?

no its a jensen healey 907 engine
and the panels are home pressed by the welder

[WestIndian424]

lil MG project...more pics soon..

[supercharged turbo]

Nice

[nigie]

YEAH!!!!!

[MG Man]

lmao
I hope he putting in a Z20LET
who pressed the floor panels?

no its a jensen healey 907 engine
and the panels are home pressed by the welder

so half ah V8 then

[Dave-ve]

still to be tuned:

[MG Man]

how u plan on tuning them?

[moti]

Dave-ve bess.

Soooooooo can I have a go?

**Runs to sharpen saw blades**

[Kalisnakov]

Have an LSD guts,think it's from 910. Small money
#745-2344

[Dave-ve]

Will install a wideband to tune them. Have to get a new sensor first. Idle jets and main venturi are in the ballpark of what is needed. May not run the car for the rest of the year.

[MG Man]

Will install a wideband to tune them. Have to get a new sensor first. Idle jets and main venturi are in the ballpark of what is needed. May not run the car for the rest of the year.

to balance them...

[Dave-ve]

Used a synchrometer.

[MG Man]

oho
well yuh orn dey
I does use a piece ah tube and four head pins

[nigie]

PROJECT DATSUN!!!!

[darrenwilson]

extra long front,no like..

[nigie]

extra long front,no like..

that's to hold the extra long engine

[pimp]

have a pair of mikuni side drafts 4 sale- 475-5345

[ramlal]

U selling