Page 1 of 1
Info on corolla tranny
Posted: April 21st, 2010, 4:28 pm
by ameir
have a 5afe in the car with 4 speed tranny. the tranny giving some problems. have a 5af 4 speed tranny, want to know if it will work on the 5afe engine. the 5af tranny has 4 wires on the selector + 2 on the side, the 5afe tranny has 2 on the side + 9 on the selector.
has anyone heard of this being done and if it works ?
any help would be greatful.
Posted: April 21st, 2010, 5:24 pm
by clone101
Should work,just use back the neutralizing switch from the first tranny
Posted: April 21st, 2010, 6:21 pm
by ameir
lil more detail please
Posted: April 21st, 2010, 7:12 pm
by clone101
Use back the selector''neutralizing switch'' witch you took off the first tranny, it should bolt back up in the same place with no modification needed, If not PM HOOK for better advice or check ah good mechanic
Posted: April 21st, 2010, 7:18 pm
by ameir
so use the selector from the 5afe tranny on the 5af tranny
Posted: April 21st, 2010, 7:22 pm
by clone101
Yes,this is why i love TOYOTA they make most stuff interchangeable
Posted: April 21st, 2010, 7:23 pm
by ameir
will try it, thanks alot
Posted: April 23rd, 2010, 1:00 pm
by keepwalking
will it work on a 20V ST ?
Posted: April 25th, 2010, 12:27 am
by ameir
well the selector from the 5afe work on the 5af tranny and it bolt up on the engine normal. did not drive it as yet, so i don't know how it pullin. but i think the 5afe tranny could work on the 20v, so i guess the 5af tranny should work to, but i dont think it i could handle that kind of speed to long.