Page 1 of 1

So, this "Ian" guy in Cunupia/Charlieville...

Posted: September 18th, 2011, 11:45 pm
by Hook
Can somebody PM me a number or at least direct me to his parts place. I've been hearing I can get 20V seal kits there.
These valve seals getting on my last nerve and TTTL won't have 'til November.

Re: So, this "Ian" guy in Cunupia/Charlieville...

Posted: September 19th, 2011, 3:50 pm
by firehead..
"Ian" aka XR Performance...Comming from the highway side...Head down Monroe road to the junction by KFC. Make a left and continue down that road. Along that main road you should see on your left hand side Scotia Bank and Custom Imports just to let you know your heading the right direction. Continue down that road until you see PAPPY's Machine Shop on your left hand side. Directly opposite the machine shop (right hand side) is a little road. Turn in there and you should see the shop with a big XR Performance in front and alot of stickers on the front door.

Note: If continuing down the main road and reach only cane land on either side TURN BACK yuh gone too far and heading towards caroni.

It may look like a dvd club or sumtin. Just pull up and knock on the door. Alot of good stuff in there. He even had a car that was featured in Six Speed Magazine a while back.

Bought my clutch and other bits there for my levin. Once is hard to find parts i go there. Just keep in mind Toyota Price.

XR Performance - 735 1086. For everything toyota.

please post what price he have it for nah. I go be looking for that same thing in a while.

Re: So, this "Ian" guy in Cunupia/Charlieville...

Posted: September 19th, 2011, 7:21 pm
by sadique
good info here... always wntd to kno where he ws located too!

Re: So, this "Ian" guy in Cunupia/Charlieville...

Posted: September 19th, 2011, 8:28 pm
by trdboy
the name of the street is eccles street