Postby brembo » July 23rd, 2007, 9:32 am
put a 1800cc gdi block and make it a 1800cc mivec. All 4g block is the same its just the bore and stroke (conrods) is different. I have real mivec rods if you want. Autorama in El socorrow have bearing new. I have bearing use if you want. This happen to me a few times so i know what yuh going thru horse.
I know a good mechanic in maraval if you want one. He does fix my car real fast.
If you going 1800mivec, use crank from gdi, rods from mivec (optional) and pistons from mivec. 4g93 gdi rods gives shorter stroke and higher compression, ie, you would rev higher, but engine must be put up strong. Make sure and torque rod bolts good, or you would spin bearings again.