Page 1 of 1
EBC
Posted: November 23rd, 2009, 9:22 pm
by Animal Pak
So d mivec i got can't stop properly at all....
Thinking bout putting some EBC black stuff front and rear
Will this make a difference or is OEM jus d way to go?
Posted: November 24th, 2009, 4:34 am
by *KRONIK*
OEM.....
and resurface the rotors one time......
and try and service the master cylinder and the calipers while u there......
Posted: November 24th, 2009, 5:42 am
by Death-Row
Animal Pak,is the car at stock power?
Posted: November 24th, 2009, 8:26 pm
by Animal Pak
Yea it's stock as a rock....
Posted: November 25th, 2009, 7:23 pm
by Rudman
Animal, I had the EBC green stuff on my lancer. It stopped after heating it up with one good mash, but when the pads were done, I had to look some new rotors shortly after.
For mivec, OEM or Akebono if U can find it.
My 2 cents.
Posted: November 25th, 2009, 8:11 pm
by Cardo-MR
If not try MINTEX!
Posted: November 26th, 2009, 7:35 am
by EVA Unit-01
Animal Pak, just get OEM brakes, you can't go wrong!
if you wanna go EBC, you definitely need to change rotors as well...
Posted: November 26th, 2009, 7:58 am
by Lean Wid IT
OEM....best u can get
Posted: November 26th, 2009, 8:43 am
by dragmaster
What about Wagner?? I know that the are a ceramic compound that most of the race brand are made up of i.e. Hawk, EBC and selected Akebono.
BTW Ceramic Pads = No/low dust
Posted: November 26th, 2009, 12:42 pm
by crazybalhead
Hawk HPS good ONCE YOU DON'T GLAZE THEM!!!!!!
Look it up...
Posted: November 26th, 2009, 4:32 pm
by W2J
crazybalhead wrote:Hawk HPS good ONCE YOU DON'T GLAZE THEM!!!!!!
Look it up...
ahhhhh look a wise man!!!
crazybalhead wrote:Animal, I had the EBC green stuff on my lancer. It stopped after heating it up with one good mash, but when the pads were done, I had to look some new rotors shortly after.
For mivec, OEM or Akebono if U can find it.
My 2 cents.
is that what you are running?
Posted: November 26th, 2009, 8:03 pm
by Lean Wid IT
what's this glazzing thing mean?
Posted: November 26th, 2009, 8:14 pm
by Rudman
No Gerrad, I am not running OEM or Akebono now.......I ran the EBC many years ago before I found out about the HAWK pads.
I am still using HAWK
Posted: November 26th, 2009, 8:53 pm
by Animal Pak
yea what is glazing...
and how can i not do it??
Posted: November 26th, 2009, 9:00 pm
by EVA Unit-01
