WTK...EVO III Crankshaft?

EVO III Monster · Postby **EVO III Monster** » June 5th, 2010, 9:11 am

would an airtrek turbo 4g63T crankshaft work on an evo 3?

Sanctifier · Postby **Sanctifier** » June 5th, 2010, 11:40 am

Does it have 6 or 7 bolts for the flywheel?

EVO III Monster · Postby **EVO III Monster** » June 5th, 2010, 6:15 pm

7 Bolts on the flywheel

hmph · Postby **hmph** » June 24th, 2010, 8:29 pm

then yes, evo 3 is 7 bolt as well

Tuner Imports · Postby **Tuner Imports** » July 4th, 2010, 12:55 pm

This would not work as the main girdle & bearings are different.

turbo_boy411 · Postby **turbo_boy411** » July 4th, 2010, 3:30 pm

To be honest all 4g63t cranks are the same (six bolt/7bolt/flanged main/trust washer), you do not interchange girdles, you can do so only if line boring of the block is done! this ain't no i heard that it'll work bs, i personally have checked both designated cranks and found to be the EXACT same spec! Bearings however ARE different, you simply use the bearings what your block came with regardless of which crank is in there!

Keep in boosting...