Page 1 of 1
WTK...EVO III Crankshaft?
Posted: June 5th, 2010, 9:11 am
by EVO III Monster
would an airtrek turbo 4g63T crankshaft work on an evo 3?
Re: WTK...EVO III Crankshaft?
Posted: June 5th, 2010, 11:40 am
by Sanctifier
Does it have 6 or 7 bolts for the flywheel?
Re: WTK...EVO III Crankshaft?
Posted: June 5th, 2010, 6:15 pm
by EVO III Monster
7 Bolts on the flywheel
Re: WTK...EVO III Crankshaft?
Posted: June 24th, 2010, 8:29 pm
by hmph
then yes, evo 3 is 7 bolt as well
Re: WTK...EVO III Crankshaft?
Posted: July 4th, 2010, 12:55 pm
by Tuner Imports
This would not work as the main girdle & bearings are different.
Re: WTK...EVO III Crankshaft?
Posted: July 4th, 2010, 3:30 pm
by turbo_boy411
To be honest all 4g63t cranks are the same (six bolt/7bolt/flanged main/trust washer), you do not interchange girdles, you can do so only if line boring of the block is done! this ain't no i heard that it'll work bs, i personally have checked both designated cranks and found to be the EXACT same spec! Bearings however ARE different, you simply use the bearings what your block came with regardless of which crank is in there!
Keep in boosting...
Re: WTK...EVO III Crankshaft?
Posted: July 4th, 2010, 4:10 pm
by Tuner Imports
Re-check the blocks for those crankshafts they are different...
Re: WTK...EVO III Crankshaft?
Posted: July 4th, 2010, 4:58 pm
by turbo_boy411
^^^in what way are they different?