Page 1 of 1
turbo-ing n/a 4g15
Posted: December 19th, 2012, 11:37 pm
by stance_movement
need some help from you guys.....wel my project has started....its a ck 4g15 in a cb3 lancer conversion....have engine and gearbox but i wanna boost this engine....have a turbo in hand (dont really knw what kind it is) jus need the turbo manifold for it....does any one know what manifold i cud use that will fit on this engine......or do i hav tew build one....
Re: turbo-ing n/a 4g15
Posted: December 20th, 2012, 9:06 am
by Ted_v2
build one
first find out what turbo you got.
get one from those sr20 fwd, as its common and can put out quite a bit of power
Re: turbo-ing n/a 4g15
Posted: December 20th, 2012, 10:15 pm
by stance_movement
thanks for the info.....but how or where do i go to build one....
Re: turbo-ing n/a 4g15
Posted: December 20th, 2012, 10:17 pm
by raybic
start off ull need a management. entire exhaust manifold rebuild , intake pipes
Re: turbo-ing n/a 4g15
Posted: December 20th, 2012, 10:27 pm
by stance_movement
well the intake pipes i could get easy.....but the exhaust manifold is the problem....where can i go tew build this???
Re: turbo-ing n/a 4g15
Posted: December 21st, 2012, 6:58 pm
by Ted_v2
Pm 747 technology I think he could point you in the right direction
Re: turbo-ing n/a 4g15
Posted: December 27th, 2012, 1:04 am
by black start
imraj brothers can do the custom work for the manifold.
Re: turbo-ing n/a 4g15
Posted: January 18th, 2013, 4:57 pm
by THE SYNDICATE
^ i think BCR ltd. does that as well!
Re: turbo-ing n/a 4g15
Posted: January 21st, 2013, 8:37 pm
by stance_movement
imma look into that weekend......tanx
Re: turbo-ing n/a 4g15
Posted: February 13th, 2013, 10:20 am
by Mercenary
stance_movement you finish turbo the 4G15?
Re: turbo-ing n/a 4g15
Posted: February 13th, 2013, 9:30 pm
by stance_movement
nooo boy....trying to upgrade my brakes....fed up with dem drums...-___-
Re: turbo-ing n/a 4g15
Posted: February 13th, 2013, 9:55 pm
by Mercenary
stance_movement wrote:nooo boy....trying to upgrade my brakes....fed up with dem drums...-___-
ok bro. Eventually u will get there. All the best in your project. Ive seen CK4 rear disc brakes for sale on the forums here.
Re: turbo-ing n/a 4g15
Posted: February 14th, 2013, 3:07 pm
by stance_movement
car up and running......will post sum pics of it 4 u guys....does any one knw what rear brakes cud work on cb lancers?_?
Re: turbo-ing n/a 4g15
Posted: February 18th, 2013, 10:15 pm
by BagoChurchBoy
What Bolt Pattern is the CB? 4X114?
Re: turbo-ing n/a 4g15
Posted: February 19th, 2013, 6:46 am
by THE SYNDICATE
4X114
Re: turbo-ing n/a 4g15
Posted: February 19th, 2013, 7:00 pm
by stance_movement
its 4x100....
Re: turbo-ing n/a 4g15
Posted: February 19th, 2013, 8:20 pm
by BagoChurchBoy
Hmmm not sure for 4 X 100. You'd have to check the forum online here for Ck rear disc brakes . If its 4 X 114 Mivec Ck, or even Cedias should work. You wld have to get other parts than just the rotor and caliper I believe. Best bet to avoid the headache would be to just buy the complete setup.
Re: turbo-ing n/a 4g15
Posted: February 19th, 2013, 8:35 pm
by stance_movement
well its really no problem running the 4x114 cuz im running universal.........but wud it bolt up back orignal....
Re: turbo-ing n/a 4g15
Posted: February 19th, 2013, 9:07 pm
by BagoChurchBoy
As long as you get the entire Spindle with the handbrake cable and trailing arm. Its supposed to work with little or no modification at all.