Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

low beam not working

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

jayclarke
Street 2NR
Posts: 30
Joined: September 2nd, 2012, 9:06 pm

low beam not working

Postby jayclarke » August 3rd, 2013, 6:41 pm

park lights an high beam working but no low beam ...just had head light switch replace still no low beam.....help :? :cry:

User avatar
BagoChurchBoy
Street 2NR
Posts: 50
Joined: October 19th, 2009, 9:39 pm

Re: low beam not working

Postby BagoChurchBoy » August 3rd, 2013, 9:45 pm

What vehicle?

jayclarke
Street 2NR
Posts: 30
Joined: September 2nd, 2012, 9:06 pm

Re: low beam not working

Postby jayclarke » August 3rd, 2013, 10:03 pm

cb2 libero

User avatar
BagoChurchBoy
Street 2NR
Posts: 50
Joined: October 19th, 2009, 9:39 pm

Re: low beam not working

Postby BagoChurchBoy » August 3rd, 2013, 10:54 pm

check the headlight harness itself. check and see if the low beam connector isn't corroded or has a short

jayclarke
Street 2NR
Posts: 30
Joined: September 2nd, 2012, 9:06 pm

Re: low beam not working

Postby jayclarke » August 4th, 2013, 5:47 pm

check harness no short or corroded spotted

jayclarke
Street 2NR
Posts: 30
Joined: September 2nd, 2012, 9:06 pm

Re: low beam not working

Postby jayclarke » August 4th, 2013, 5:53 pm

when i put on the low beam you hear the relay clicks but no low beam

User avatar
D AOK
Ricer
Posts: 23
Joined: June 19th, 2008, 9:54 am
Contact:

Re: low beam not working

Postby D AOK » August 4th, 2013, 10:19 pm

Check your headlamp fuse.

jayclarke
Street 2NR
Posts: 30
Joined: September 2nd, 2012, 9:06 pm

Re: low beam not working

Postby jayclarke » August 7th, 2013, 7:51 pm

got it sort out thanks alot guy wire had burst so we jus ran a new wire

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 2 guests