trinituner.com

Hey anyone knows someone who can service/fix the ABS pump for the 2008 local CY lancer??
The ABS Sensor light keeps coming on even after replacing the sensor multiple times.

Had a similar issue on CS lancer. wasnt the sensor. Ended up being one of the teeth on the ring where the sensor reads the information was damaged. Just a fyi, you might want to check this before looking at servicing or replacing abs pump
Abs pump/control module should not give issues especially if the braking system is working as it should be.

My vehicle is 8 yrs old and doing approx 160000 km.
Once in a while the abs light would come on and scan tools would show the left front abs sensor.
The problem usually goes away.
Also once in a while , if I brake hard to cause the ABS to function the brake pedal would get softer and sink to the floor. Afterwards it functions normal. No leaks seen , fulid level is good.
Anyone ever had this problem

Sounds like the seals in the master.

Nissan4life...where did you carry your vehicle to check the "teeth"?

Nissan4life...where did you carry your vehicle to check the "teeth"?

I have a Lancer and it was showing Engine switch light and after diagnosing P0123 TPS A circuit low input, P0223- TPS b circuit High input. P1233- Fuel pump driver module offline P1234- Fuel pump driver module offline were found. I think i need to change the TPS but what should i do for the fuel pump error i have no idea.
Any idea what are the fix for these errors?

anthonyanthony wrote:My vehicle is 8 yrs old and doing approx 160000 km.
Once in a while the abs light would come on and scan tools would show the left front abs sensor.
The problem usually goes away.
Also once in a while , if I brake hard to cause the ABS to function the brake pedal would get softer and sink to the floor. Afterwards it functions normal. No leaks seen , fulid level is good.
Anyone ever had this problem

You ever solved this issue, what was causing this?