TriniTuner.com  |  Latest Event:  

Forums

The Official CS Lancer Thread!

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

Nidish
Street 2NR
Posts: 30
Joined: December 12th, 2014, 11:53 pm

Re: The Official CS Lancer Thread!

Postby Nidish » August 6th, 2016, 11:03 am

Hey guys, I have a 2004 Lancer CS3 4G18 engine. I've been using Shell HX7 10W40 oil and change every 7000Kms. I want to switch to Shell Ultra 5W40 Full synthetic and change every 15000Kms, what do you think?

Advertisement
User avatar
BrotherHood
TriniTuner 24-7
Posts: 8233
Joined: October 20th, 2010, 2:41 pm
Location: Bringing HID & LED to a location near you! 355-3165. 704-5442 (WhatsApp).

Re: The Official CS Lancer Thread!

Postby BrotherHood » August 6th, 2016, 11:18 am

What's wrong with the HX7? Snd why do you want to change every 15,000kms? 15,000kms kinda extremely long.
Not even them extended change interval oils like Royal Purple & Amsoil have a 15,000km change interval.
No matter the brand/viscosity of oil you want to use, 15,000kms is too long a change interval.

User avatar
Dave
3NE 2NR Moderator
Posts: 15020
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: The Official CS Lancer Thread!

Postby Dave » August 6th, 2016, 11:40 am

^^yes they do.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 661
Joined: February 18th, 2010, 7:18 pm

Re: The Official CS Lancer Thread!

Postby Jade_Inc. » August 6th, 2016, 12:04 pm

Royal purple is 15k I believe bro

User avatar
BrotherHood
TriniTuner 24-7
Posts: 8233
Joined: October 20th, 2010, 2:41 pm
Location: Bringing HID & LED to a location near you! 355-3165. 704-5442 (WhatsApp).

Re: The Official CS Lancer Thread!

Postby BrotherHood » August 6th, 2016, 3:43 pm

Thought was 12,000KMs. My bad.

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11008
Joined: March 30th, 2010, 8:58 pm

Re: The Official CS Lancer Thread!

Postby Ted_v2 » August 6th, 2016, 7:20 pm

I'm interested in that due to the fact I don't like to change oil.

User avatar
Dave
3NE 2NR Moderator
Posts: 15020
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: The Official CS Lancer Thread!

Postby Dave » August 6th, 2016, 9:38 pm

Amsoil xl goes 10k km with a wix/Bosch long life filter

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 661
Joined: February 18th, 2010, 7:18 pm

Re: The Official CS Lancer Thread!

Postby Jade_Inc. » August 6th, 2016, 11:30 pm

Seems like I love to change oil, every 5 weeks I do 5000km

ckGSR
Riding on 13's
Posts: 12
Joined: August 4th, 2016, 9:47 pm

Re: The Official CS Lancer Thread!

Postby ckGSR » August 16th, 2016, 11:07 pm

Anybody knows what oil is recommended for a 4G18 gearbox?

User avatar
Dave
3NE 2NR Moderator
Posts: 15020
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: The Official CS Lancer Thread!

Postby Dave » August 17th, 2016, 7:28 am

GL4 75w/90

User avatar
ZeroOne
12 pounds of Boost
Posts: 2242
Joined: August 5th, 2008, 4:10 pm

Re: The Official CS Lancer Thread!

Postby ZeroOne » August 19th, 2016, 11:50 am

I'd like to see the color of that oil at 15,000 km

User avatar
ghostprotocol
Ricer
Posts: 28
Joined: August 12th, 2013, 9:37 am

Re: The Official CS Lancer Thread!

Postby ghostprotocol » August 20th, 2016, 3:40 pm

good day folks,

can anyone help me get a throttle body for my cs2 lancer.

i looking it for it new brand online part # MR578288

got rip off buying foreign used one.

User avatar
Dave
3NE 2NR Moderator
Posts: 15020
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: The Official CS Lancer Thread!

Postby Dave » August 20th, 2016, 6:37 pm

Brand new would be over 6k!

User avatar
PapaC
Riding on 17's
Posts: 1354
Joined: December 13th, 2007, 12:25 pm

Re: The Official CS Lancer Thread!

Postby PapaC » August 24th, 2016, 6:49 am

Image
Anybody checked this out? What kind of parts available.

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 661
Joined: February 18th, 2010, 7:18 pm

Re: The Official CS Lancer Thread!

Postby Jade_Inc. » August 24th, 2016, 7:02 pm

^Nope will check dem out... I need two cradles for cs

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 661
Joined: February 18th, 2010, 7:18 pm

Re: The Official CS Lancer Thread!

Postby Jade_Inc. » August 26th, 2016, 8:26 pm

So I've been having this lil issue a while now: every time I putting down the glass or sending up it, all the lights in d car dim and if I'm controlling 2 or more glasses at a time, it dims and slows down.
The charging voltage drops to 12.6 when that happens. What cud be a possible problem there?

User avatar
Dave
3NE 2NR Moderator
Posts: 15020
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: The Official CS Lancer Thread!

Postby Dave » August 26th, 2016, 8:59 pm

Grounding issue or alternator not operating efficiently

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11008
Joined: March 30th, 2010, 8:58 pm

Re: The Official CS Lancer Thread!

Postby Ted_v2 » August 27th, 2016, 6:51 am

Correct. Usually grounds cause those problems. Rarely alternators but still check it out

User avatar
Jade_Inc.
Chronic TriniTuner
Posts: 661
Joined: February 18th, 2010, 7:18 pm

Re: The Official CS Lancer Thread!

Postby Jade_Inc. » September 3rd, 2016, 7:55 pm

So guy, I need some help finding a reliable source to ship some parts for my engine plz

The engine overhaul gasket kit (for top and bottom) OEM part number is MD978141

The OEM standard size piston set part number is MD361982

There are 0.25 & 0.50 oversize OEM piston rings available as well.

0.25 oversize rings - MD366905

0.50 oversize rings - MD366906

P/N courtesy turbo beast.

User avatar
ZeroOne
12 pounds of Boost
Posts: 2242
Joined: August 5th, 2008, 4:10 pm

Re: The Official CS Lancer Thread!

Postby ZeroOne » September 5th, 2016, 8:40 am

Try amayama.com

nissan4life
Chronic TriniTuner
Posts: 507
Joined: April 10th, 2011, 1:53 pm
Location: 3NE2NR is my LIFE

Re: The Official CS Lancer Thread!

Postby nissan4life » September 7th, 2016, 3:16 pm

My lancer brothers I am in need of some advise.
4g15 gdi lancer has recently started acting up when going up inclines. The car drives very well on flat and i can go up lady young and the maracus road without any issues.
The problem im encountering is on steep hills or steady inclines without a flat sloop. The car refuses to go after a while and would jerk and buck (sounds like its backfiring)
I have already changed all the coilpack and plugs. My next step is to replace air flow sensor
There are no cel so scanning is not an option as i have no codes stored.

Has any one encountered issues like this already?
Can Fuel pump (intank) or solenoid on cvt cause this?

I really dont want to be changing parts and guessing, i want to solve this asap
Older heads hardly ever on this forum but im sure theres knowledge still floating around,any assistance would be nice.

nissan4life
Chronic TriniTuner
Posts: 507
Joined: April 10th, 2011, 1:53 pm
Location: 3NE2NR is my LIFE

Re: The Official CS Lancer Thread!

Postby nissan4life » September 29th, 2016, 1:58 pm

ok fellas (thats if anyone still checks this forum)update on the situation posted above. It was the air flow sensor.

Finally came up with a cel and the car went into limp mode. wouldnt even go into reverse. just enough power to drive to get it scanned.

I ask and answer my own question, things get bad inside here yes.
Like everybody gone CY forum :D time to upgrade yes.

User avatar
BrotherHood
TriniTuner 24-7
Posts: 8233
Joined: October 20th, 2010, 2:41 pm
Location: Bringing HID & LED to a location near you! 355-3165. 704-5442 (WhatsApp).

Re: The Official CS Lancer Thread!

Postby BrotherHood » September 29th, 2016, 3:15 pm

LOL. All them former CS men is CY men now.

nissan4life
Chronic TriniTuner
Posts: 507
Joined: April 10th, 2011, 1:53 pm
Location: 3NE2NR is my LIFE

Re: The Official CS Lancer Thread!

Postby nissan4life » September 30th, 2016, 2:40 pm

yea boy BH. pressure...like i hadda make the move sooner than i thought.

User avatar
KURMAman
Riding on 16's
Posts: 1235
Joined: September 5th, 2006, 9:04 pm
Contact:

Re: The Official CS Lancer Thread!

Postby KURMAman » October 3rd, 2016, 12:11 am

Hey folks,

So been awhile now since i wanted to change my deck...so checked online for options... and found this..
Image

And i search many online sources, and only found very vague explainations and vids on a conversion, so decided to take on the project anyways...

So i bought it on ebay, and checked how it would look...
Image

So I had to take out the deck and a/c, then move the a/c to the bottom (where my original CD changer)....
most difficult part of this was to dremel-out a piece of metal from the back-right inside to fit the a/c unit into the gap... then run the stiff cabling back to connect the a/c controls from the below... that took about 2 hours to cut and fit...

Image

....looks good so far...

Next step was to get the correct mounting brackets for a cs3... which i realized is impossible, as no-one converts single-din to double-din in cs3 lancers..lol...
went to some audio stores, and they said to use the strips/adapter strip.... but that was really useless....
so i had to use the original and fit it to the highest part of the deck...
Image

then just fitted and manipulated it in the space...
Image

After that, popped in the new centre plate over and...
Image

I also took 2 small magnets.. stuck one neatly to the right of the centre console and the other to the back of the remote... so it'll look snug...

Image


I was surprised that there wasnt any proper guide for these types of installs.... so hope this kinda maybe helps u all.

#KURMA

User avatar
Kronik
Shifting into 6th
Posts: 2186
Joined: July 23rd, 2004, 9:37 pm
Location: Central
Contact:

Re: The Official CS Lancer Thread!

Postby Kronik » October 3rd, 2016, 2:32 am

Very nice. Might just look into doing something like this

User avatar
PapaC
Riding on 17's
Posts: 1354
Joined: December 13th, 2007, 12:25 pm

Re: The Official CS Lancer Thread!

Postby PapaC » October 3rd, 2016, 3:53 am

Thanks for the write up. I want to do the same thing at some point in time.

User avatar
gastly369
TriniTuner 24-7
Posts: 7875
Joined: May 15th, 2009, 4:40 pm
Location: trinidad

Re: The Official CS Lancer Thread!

Postby gastly369 » October 3rd, 2016, 5:35 am

Nice karma
Prob the only detail conversion on the net for this lol

User avatar
BrotherHood
TriniTuner 24-7
Posts: 8233
Joined: October 20th, 2010, 2:41 pm
Location: Bringing HID & LED to a location near you! 355-3165. 704-5442 (WhatsApp).

Re: The Official CS Lancer Thread!

Postby BrotherHood » October 3rd, 2016, 9:08 am

Nice conversion bro. Very well done.

User avatar
KURMAman
Riding on 16's
Posts: 1235
Joined: September 5th, 2006, 9:04 pm
Contact:

Re: The Official CS Lancer Thread!

Postby KURMAman » October 4th, 2016, 11:31 am

thanx fellas...

Car is 11 years old.. and just did a full paintjob and update.... the deck install was the final part....

new halo headlamps.. new grille.. (everything bought from eBay)...
Image
Image

Had the OZ rims awhile now (bought them in 2008 and painted over).. so decided to update.

Image

new rims
Image

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 3 guests