TriniTuner.com  |  Latest Event:  

Forums

The Mazda 3 thread

MAZDA People United - it continues here

Moderator: 3ne2nr Mods

Amit
Sweet on this forum
Posts: 278
Joined: April 29th, 2006, 7:28 pm
Location: trinidad

Re: The Mazda 3 thread

Postby Amit » January 5th, 2018, 7:39 pm

looking for a left side axle for the 2007 big nut,

most used places have the one with the bolt

New yum yum
Street 2NR
Posts: 56
Joined: July 17th, 2013, 2:15 pm

Re: The Mazda 3 thread

Postby New yum yum » January 7th, 2018, 5:09 am

Amit wrote:looking for a left side axle for the 2007 big nut,

most used places have the one with the bolt

Are you sure is an axle you need. Maybe it’s the cup or tripod. It takes a lot to damage the axle

Amit
Sweet on this forum
Posts: 278
Joined: April 29th, 2006, 7:28 pm
Location: trinidad

Re: The Mazda 3 thread

Postby Amit » January 7th, 2018, 9:10 pm

New yum yum wrote:
Amit wrote:looking for a left side axle for the 2007 big nut,

most used places have the one with the bolt

Are you sure is an axle you need. Maybe it’s the cup or tripod. It takes a lot to damage the axle


I think the cup is damage, vibration when mashing gas

But I don’t know if it could be changes

User avatar
ivar
3NE2NR is my LIFE
Posts: 706
Joined: February 17th, 2009, 3:49 pm
Location: anywhere at anytime
Contact:

Re: The Mazda 3 thread

Postby ivar » January 18th, 2018, 7:19 am

Good morning, looking for top right side engine mount for 2007 mazda 3 (1.6l). Also under shields for same .... any info?

User avatar
Bosse
Street 2NR
Posts: 86
Joined: January 17th, 2006, 11:50 am
Location: East

Re: The Mazda 3 thread

Postby Bosse » January 18th, 2018, 8:19 pm

Fellas I have been trying to purchase oem Mazda parts online but when I enter my Vin number they don't recognize it

How do I go about or what site can I use to buy oem parts for my local 1.6 Mazda

dredman1
Riding on 18's
Posts: 1794
Joined: October 7th, 2005, 10:47 pm

The Mazda 3 thread

Postby dredman1 » January 19th, 2018, 8:00 am

ivar wrote:Good morning, looking for top right side engine mount for 2007 mazda 3 (1.6l). Also under shields for same .... any info?

Almost any parts place you will get it, but only the aftermarket brands which are not liquid filled.

I've only ever found the oem liquid filled ones at S/Sales. They are MUCH better at damping vibration and last much longer than the aftermarket ones, but of course cost an arm and a leg compared to aftermarket.

Let your wallet and stress level decide.
Last edited by dredman1 on January 19th, 2018, 8:00 am, edited 1 time in total.

dredman1
Riding on 18's
Posts: 1794
Joined: October 7th, 2005, 10:47 pm

Re: The Mazda 3 thread

Postby dredman1 » January 19th, 2018, 8:03 am

Bosse wrote:Fellas I have been trying to purchase oem Mazda parts online but when I enter my Vin number they don't recognize it

How do I go about or what site can I use to buy oem parts for my local 1.6 Mazda

I've bought from several sites, but just ignored the VIN info. U should see some disclaimer like "without the VIN we cant guarantee fitment and will not accept returns bla bla bla".

So i just clicked next/proceed and got thru with the orders

User avatar
Bosse
Street 2NR
Posts: 86
Joined: January 17th, 2006, 11:50 am
Location: East

Re: The Mazda 3 thread

Postby Bosse » January 19th, 2018, 2:53 pm

dredman1 wrote:
Bosse wrote:Fellas I have been trying to purchase oem Mazda parts online but when I enter my Vin number they don't recognize it

How do I go about or what site can I use to buy oem parts for my local 1.6 Mazda

I've bought from several sites, but just ignored the VIN info. U should see some disclaimer like "without the VIN we cant guarantee fitment and will not accept returns bla bla bla".

So i just clicked next/proceed and got thru with the orders


I just want to make sure that the parts online will work on the model we have here

BTW do you which site sells the O2 sensor for a 2008 Mazda 3

dredman1
Riding on 18's
Posts: 1794
Joined: October 7th, 2005, 10:47 pm

Re: The Mazda 3 thread

Postby dredman1 » January 19th, 2018, 9:48 pm

Never bought on O2 sensor.

Online US sites obviously dont sell for parts for the 1 6, only 2.0 and 2.3 models.

You'll need to get the part number for the 1.6 O2 sensor and check to make sure the sensor for US 2.0 model is compatible.

User avatar
konartis
Shifting into 6th
Posts: 2119
Joined: January 11th, 2011, 11:22 am
Location: south

Re: The Mazda 3 thread

Postby konartis » January 22nd, 2018, 5:11 pm

Bosse wrote:
dredman1 wrote:
Bosse wrote:Fellas I have been trying to purchase oem Mazda parts online but when I enter my Vin number they don't recognize it

How do I go about or what site can I use to buy oem parts for my local 1.6 Mazda

I've bought from several sites, but just ignored the VIN info. U should see some disclaimer like "without the VIN we cant guarantee fitment and will not accept returns bla bla bla".

So i just clicked next/proceed and got thru with the orders


I just want to make sure that the parts online will work on the model we have here

BTW do you which site sells the O2 sensor for a 2008 Mazda 3

eBay has them, bought some time ago

User avatar
Bosse
Street 2NR
Posts: 86
Joined: January 17th, 2006, 11:50 am
Location: East

Re: The Mazda 3 thread

Postby Bosse » January 22nd, 2018, 9:33 pm

konartis wrote:
Bosse wrote:
dredman1 wrote:
Bosse wrote:Fellas I have been trying to purchase oem Mazda parts online but when I enter my Vin number they don't recognize it

How do I go about or what site can I use to buy oem parts for my local 1.6 Mazda

I've bought from several sites, but just ignored the VIN info. U should see some disclaimer like "without the VIN we cant guarantee fitment and will not accept returns bla bla bla".

So i just clicked next/proceed and got thru with the orders


I just want to make sure that the parts online will work on the model we have here

BTW do you which site sells the O2 sensor for a 2008 Mazda 3

eBay has them, bought some time ago

There is a lot on eBay but how do I know it will work with the m3 down here

biggz1985
Street 2NR
Posts: 62
Joined: May 13th, 2010, 10:28 pm

Re: The Mazda 3 thread

Postby biggz1985 » January 28th, 2018, 12:20 am

Y'all know if any RoRo companies got the 2014 Mazda Axela in Stock?

originalbling
Chronic TriniTuner
Posts: 554
Joined: September 27th, 2004, 10:26 am
Contact:

Re: The Mazda 3 thread

Postby originalbling » January 29th, 2018, 3:36 pm

Has anyone changed out any exterior bulbs to LED?

Does the 2006/07 models need a load resistor or would it work just so?

I went to change what i thought was a blown brake light bulb only to find part of the housing melted on both sides.
So i considering changing to led bulbs and new housings

User avatar
sean364
Street 2NR
Posts: 89
Joined: November 5th, 2007, 9:40 pm
Location: arima

Re: The Mazda 3 thread

Postby sean364 » February 2nd, 2018, 11:10 am

need some help. im looking for a k&n(or equivalent) filter for a 2015 local mazda 3. anyone know where i can get this local or online?

User avatar
buscax
3NE 2NR for life
Posts: 110
Joined: September 11th, 2017, 3:05 pm

Re: The Mazda 3 thread

Postby buscax » February 3rd, 2018, 8:14 am

Blessings brethren...just bought a local used mazda3 2004...great condition with some minor repairs.

Wanted to know if the actuator could be repaired.
If not then I looking for a great price on the left rear door actuator.

User avatar
MAZTUNE
Riding on 17's
Posts: 1379
Joined: October 17th, 2006, 8:04 pm
Location: San Fernando Trinidad

Re: The Mazda 3 thread

Postby MAZTUNE » February 9th, 2018, 9:32 pm

buscax wrote:Blessings brethren...just bought a local used mazda3 2004...great condition with some minor repairs.

Wanted to know if the actuator could be repaired.
If not then I looking for a great price on the left rear door actuator.


sorted.....

guys in the next coming months will be stocking more oem and aftermarket parts for the BK Mazda 3 including those hard to get oxygen sensors.

Kumar Bissessar
Riding on 13's
Posts: 2
Joined: February 8th, 2018, 9:51 pm

Re: The Mazda 3 thread

Postby Kumar Bissessar » February 13th, 2018, 10:55 am

This is my first post looking for some advice.
The new shape madza infomatic comtroller restarts every now and again. There is no pattern or specific day from what I can tell.
Is it a software update issue and if there is anyone out there that can do it for me and price.
Thanks a lot..

dredman1
Riding on 18's
Posts: 1794
Joined: October 7th, 2005, 10:47 pm

Re: The Mazda 3 thread

Postby dredman1 » February 14th, 2018, 2:25 pm

^^^ Is the car a RORO, or was it bought from S/Sales?

swiftsooknanan121
Riding on 13's
Posts: 1
Joined: June 23rd, 2015, 4:10 pm

Re: The Mazda 3 thread

Postby swiftsooknanan121 » February 14th, 2018, 8:14 pm

Good day. Looking for a 2005 mazda 3 ac compressor for the Singapore vehicles

NR8
Riding on 18's
Posts: 1866
Joined: January 14th, 2012, 2:20 pm

Re: The Mazda 3 thread

Postby NR8 » February 15th, 2018, 7:57 am

Got a couple Dunlop 205/55/16 tires and Mazda 3 rims for sale...
Tires viewtopic.php?f=6&t=721694
Rims viewtopic.php?f=6&t=721695

User avatar
sketelpimp
Riding on 13's
Posts: 13
Joined: February 19th, 2006, 10:21 pm

The Mazda 3 thread

Postby sketelpimp » February 16th, 2018, 7:39 pm

Hey guys got a local 2004 Mazda 3 in need of serious tlc. The handbrake cable needs to be sourced, along with the trunk cable and also the gas lid opener. The fog lights as well as the finishers were removed from the vehicle so I need those as well.
Interior wise the radio console numbers and letters can’t be made out so either I go for an aftermarket setup or I try to source the original.
Lastly the front driver seat needs to change.

I know it’s a hefty list but if anyone can assist in anyway I’ll be grateful. I never owned a Mazda so I’m like a fish out of water here. My contact is 7579822 if u prefer to WhatsApp

User avatar
konartis
Shifting into 6th
Posts: 2119
Joined: January 11th, 2011, 11:22 am
Location: south

The Mazda 3 thread

Postby konartis » February 23rd, 2018, 7:57 pm

Brand new Mazda 3 pads, bought for the ‘09 Mzd3 but can be used for ‘05 onwards to ‘10 I sold the car recently before changing them.

$400.00

Brand : Mintex

Pics not uploading, so inbox for contact details and pics

SOLD :::::::

Anika
Riding on 13's
Posts: 2
Joined: September 16th, 2017, 6:20 am

Re: The Mazda 3 thread

Postby Anika » March 7th, 2018, 8:40 pm

ivar wrote:
CCS wrote:hey guys have some new mazda 3 parts 2007-10 for the 2.0 engine.

ac compressor-$1000
engine mount-$400
tensioner-$500

#296-5264


Is the engine mount the same as the 1.5 model?


Do u still have the compressor

User avatar
CCS
Ricer
Posts: 18
Joined: October 4th, 2013, 9:30 am

Re: The Mazda 3 thread

Postby CCS » March 12th, 2018, 1:41 pm

@ Anika yea i do #2965264

dredman1
Riding on 18's
Posts: 1794
Joined: October 7th, 2005, 10:47 pm

Re: The Mazda 3 thread

Postby dredman1 » March 27th, 2018, 12:40 am

Anyone here have the newest model RORO Mazda 3 (2014+ model year) with the Skyactiv 1.5L engine and can say if it uses premium or super? Referrng to the model with gas engine only, no hybrid.

Lancernh
Street 2NR
Posts: 35
Joined: June 30th, 2016, 7:01 am

Re: The Mazda 3 thread

Postby Lancernh » June 6th, 2018, 8:17 pm

Looking for a MAF sensor for a 2016 mazda3.
1.5l engine

ultimatehustler2010
Street 2NR
Posts: 44
Joined: March 21st, 2008, 9:11 am
Contact:

need a car electrican for house visit in diego martin asap

Postby ultimatehustler2010 » July 15th, 2018, 8:38 am

GOod day all

I have a mazda 3 2006 i engined washed it and 4 fuses on the fuse box stop getting power i believe the fuses refer to engine ignition when i look at the fuse box is there any electrican that can do a house visit and assist 352 3906 aaron thanks i really need help.

dredman1
Riding on 18's
Posts: 1794
Joined: October 7th, 2005, 10:47 pm

Re: The Mazda 3 thread

Postby dredman1 » July 15th, 2018, 9:50 pm

Can't help with the electrician, sorry.

But just to point out that the Mazda 3 Z6 engine does not take well to engine washing, especially as the ECU is at the top of the engine (to the right of the air filter). You have to be VERY careful when cleaning it.

I know of 1 person who fried the ECU in their 3 as a result of engine washing, and heard of several others.

First step might be to remove the ECU cover and dry it out as much as possible.

Hopefully in your case it's not that serious.

Brans
Riding on 13's
Posts: 7
Joined: January 10th, 2012, 6:22 pm

Re: The Mazda 3 thread

Postby Brans » July 20th, 2018, 5:42 pm

Guys I looking for the best place to do alignment, cambering speed balance etc. I get a vibration on the steering wheel after at higher speeds. Checked laughlin and de gannes who was a waste of time and then Aranguez Alignement Center who were better but still not perfect.

dredman1
Riding on 18's
Posts: 1794
Joined: October 7th, 2005, 10:47 pm

Re: The Mazda 3 thread

Postby dredman1 » July 22nd, 2018, 12:35 pm

Brans wrote:Guys I looking for the best place to do alignment, cambering speed balance etc. I get a vibration on the steering wheel after at higher speeds. Checked laughlin and de gannes who was a waste of time and then Aranguez Alignement Center who were better but still not perfect.

Milage Mack, the south branch if possible.

Make sure and specify to the supervisor you're having the above problem (in more detail if possible) and you're trying to get resolved.

Advertisement

Return to “MAZDA”

Who is online

Users browsing this forum: No registered users and 5 guests