Page 1 of 1
HELP NEEDED, vibration on MAZDA 3
Posted: April 24th, 2015, 1:22 pm
by triniboythug
Hey tuners, I have a 2008 Mazda 3 and I've started having this issue when accelorating that am getting a vibration coming through the steering wheel, its not the type you get like if the tyres need speed balancing. To put it as best as I can say is it sounds like 2 heavy pieces of metal vibrating against each other. The steering has no shimming but a constant vibration at any speed. Anyone please !!!
Re: HELP NEEDED, vibration on MAZDA 3
Posted: April 27th, 2015, 3:45 pm
by triniboythug
HELP....... ANYONE !!!!!
Re: HELP NEEDED, vibration on MAZDA 3
Posted: April 27th, 2015, 5:09 pm
by pinks
Carry d ting by a mechanic to check na bai
Re: HELP NEEDED, vibration on MAZDA 3
Posted: April 27th, 2015, 9:08 pm
by dredman1
Based on the details you gave, first things that come to mind are most likely the transmission and/or engine mounts are busted.
As mentioned however, it would be best to get it checked out by a mechanic to make sure.
Re: HELP NEEDED, vibration on MAZDA 3
Posted: June 14th, 2015, 4:19 pm
by Amit
check mount next to coolant bottle 1st mount that usually fail
Re: HELP NEEDED, vibration on MAZDA 3
Posted: August 6th, 2015, 1:15 pm
by RBphoto
Could be warped rims
Re: HELP NEEDED, vibration on MAZDA 3
Posted: August 8th, 2015, 6:19 pm
by konartis
check steering rack ends/tie rods ends, i had that issue in my mzd3 some years ago, when i press brake used to vibrate the steering, nothing on the brake peddle etc. changed the mounts and still had it, then changed out the rack ends and it was fixed, would recommend you go original tho, alot of inferior parts that dont last.
Re: HELP NEEDED, vibration on MAZDA 3
Posted: August 8th, 2015, 8:18 pm
by Eagle
I had similar problem and a mechanic said that the axle up does wear and it either need to be change or rebuild.what is ur vehicle mileage.
Re: HELP NEEDED, vibration on MAZDA 3
Posted: October 1st, 2015, 9:23 pm
by dredman1
konartis wrote:check steering rack ends/tie rods ends, i had that issue in my mzd3 some years ago, when i press brake used to vibrate the steering, nothing on the brake peddle etc. changed the mounts and still had it, then changed out the rack ends and it was fixed, would recommend you go original tho, alot of inferior parts that dont last.
Having this issue happening on my MZ3 now. Was it the inner or outer tie rod ends that needed changing, or both?
Re: HELP NEEDED, vibration on MAZDA 3
Posted: November 22nd, 2015, 9:11 am
by art n motion
let your mechanic/suspension person give your vehicle a check....it may be a host of issues or one!
Re: HELP NEEDED, vibration on MAZDA 3
Posted: December 2nd, 2015, 11:07 am
by konartis
dredman1 wrote:konartis wrote:check steering rack ends/tie rods ends, i had that issue in my mzd3 some years ago, when i press brake used to vibrate the steering, nothing on the brake peddle etc. changed the mounts and still had it, then changed out the rack ends and it was fixed, would recommend you go original tho, alot of inferior parts that dont last.
Having this issue happening on my MZ3 now. Was it the inner or outer tie rod ends that needed changing, or both?
Was the inner