:: The official TOOLS thread ::

[hong kong phooey]

http://www.harborfreight.com/12-in-heav ... 61173.html

that price is good but then again is harbor freight. Black friday sales coming up, you can probably get the dewalt impact for around 120 us or even cheaper .
I got this for about 125 US during fathers day sale this year
http://www.homedepot.com/p/DEWALT-1-2-i ... /202512216

[Strugglerzinc]

Who can help me. Seeing the Chicago electric impact wrench selling by pro tools for $700. Anybody can give any reviews on it.

viewtopic.php?f=6&t=685721
easily spins out wheel nuts tightened pneumatically about 8mths ago

chicago electric is harbor freight...for electrical stuff might wanna stay far

Harbour freight electric tools are not a good idea.

[terique]

What's a good reasonably priced impact wrench. Saw a Milwaukee corded by ssl for $1500

[X_Factor]

was referring to the one i have up for sale atm....and i know better than to touch harbor freight electrical stuff

viewtopic.php?f=6&t=685721

i have that for 900.00, brand new in box...just tested on a couple wheel nuts to ensure it was working

[X_Factor]

What's a good reasonably priced impact wrench. Saw a Milwaukee corded by ssl for $1500

send me your number, porter cable impact wrench --900.00
new

[supercharged turbo]

Looking at a gas pressure washer around 2600 psi.My choices are between Karcher and Honda.Which would you recommend and why in terms of availabilty of parts and price of parts,ease of accessing parts locally and longevity of equipment?

[pugboy]

Karcher is the stihl of pressure washers

[X_Factor]

karcher from hadden as they service....repair....give warranty

[hong kong phooey]

What about the Generac power washer ?

[pugboy]

generacs have mixed reviews, better go in one of them small engine place and ask their opinion as they fixing them thing all day

[VRamlal]

Lf special toyota oil filter tool

[Chimera]

plenty of them small engine places have endless pricesmart generators fixing lol

be wary

[ADONI]

Lf special toyota oil filter tool

Which vehicle? If it the cup wrench, Toyota is mainly 14 flute and well check your diameter.
This works for my nze121:
https://www.amazon.com/Assenmacher-Spec ... B0015PK3AG

[car]

Lf special toyota oil filter tool

Which vehicle? If it the cup wrench, Toyota is mainly 14 flute and well check your diameter.
This works for my nze121:
https://www.amazon.com/Assenmacher-Spec ... B0015PK3AG

I bought 1 on eBay for about $4. Same ting. You can check faiz in Marabella. They may have it.

[hindian]

8fb92b37-5d7a-4e88-bfe8-03f65bf364f3.jpg._CB289340276__SR285,285_.jpg (10.33 KiB) Viewed 3246 times

this one?

[*KRONIK*]

Anybody ever try one of these?
and is it worth the time/money?


DEWALT DCST920B 20V Lithium Ion XR Brushless String Trimmer

Will be used for basic trimming around the yard and maintenance.

[Ted_v2]

i used a electric one already corded, wasnt impressive but did its job.
Works good for lawn grass anything like nut grass its not making sense.

anyone has any experience with DA sanders? im doing some bodywork these days and i could do with a Air sander.
Something with a low air usage, i barely getting by with my 20gallon direct drive.

also the sandpaper for it with the velcro backing, where can i purchase this?
i could almost never keep sandpaper around, it always bursting bad. saw the cloth backing one really standing up.

anyone into painting here? im also looking for a water trap and a decent regulator , did some work today and tons of water in my lines. When i unjacked my paint gun two drops of water hit my hand after almost 15 mins working.

thoughts?

[Strugglerzinc]

Sanctifier is the man to tell you bout diy filter and dryer

I use one of these as my air lines run about 100ft on the walls so there is enough length to condense, but then again, i don't paint. Simple separators like these may be inadequate, i dunno.

[VRamlal]

8fb92b37-5d7a-4e88-bfe8-03f65bf364f3.jpg._CB289340276__SR285,285_.jpg this one?

Yes this one
I need it asap
Uk where i can buy1

[rspann]

Ted, why you don't try an electric DA sander. That compressor will not generate enough air to keep the air sander running steady. ACE in Chaguanas has some pretty decent water separators cheap.

[Ted_v2]

What about the pads for the da? Where can I get them. Is it reasonable?

[rspann]

What about the pads for the da? Where can I get them. Is it reasonable?

Any paint shop, and it cheap,one sells for about $6, they come from 36 grit to 2000 grit. There is velcro and stick on. There are those with holes for the dust to vacuum up into and those without. There is even a larger DA for big , flat areas like doors and hoods etc.

[Ted_v2]

Great. Definitely going to get one, would help tons with prep work

[rspann]

I mainly use it for filler work, because nothing beats a sanding block for proper prep work. If you don't use it properly you get a lot of the DA swirls in the final work. I even use it sometimes with 1200 to denib and rub before buffing. If you can, invest in a compressor with an intercooler and an automatic drain. I have a 120 gal 6hp for painting, with intercooler and electric drain valve, you would be surprised at the headaches it eliminates.

[streetbeastINC.]

need a hammer drill or small jack hammer to rent

[rspann]

Right behind KFC in Cunupia, They rent all kinds of tools.

[*KRONIK*]

need a hammer drill or small jack hammer to rent

Check the guy on adventist street/ojoe road corner.

He has jack hammers and rotary hammers too.

[streetbeastINC.]

^^^can a hammer drill be used to burst concrete,, never used one of these for some reason.... need to burst some concrete around a drain...

[rspann]

Use a jack hammer, does not have to be a big one.

[adnj]

Anybody ever try one of these?
and is it worth the time/money?


DEWALT DCST920B 20V Lithium Ion XR Brushless String Trimmer

Will be used for basic trimming around the yard and maintenance.

I have. They work well for trimming and edging. They don't work so well for actually cutting a lawn. They really shine for very small lawns were noise is a problem like an office building.