Moderator: 3ne2nr Mods
X_Factor wrote:anybody here wants a furman line conditioner ?
X_Factor wrote:anybody here wants a furman line conditioner ?
Thats a pic..carluva wrote:What model?X_Factor wrote:anybody here wants a furman line conditioner ?
timelapse wrote:Aye audio nerds:
Can I connect the sub-out on a receiver to a second amp via rca? Would it be a low pass signal if it is possible?
timelapse wrote:Aye audio nerds:
Can I connect the sub-out on a receiver to a second amp via rca? Would it be a low pass signal if it is possible?
MobSpec wrote:Any recommendations for someone to repair a Receiver? Plus any good options for new or used ones to buy?
Thanks I'll contact themDuane 3NE 2NR wrote:MobSpec wrote:Any recommendations for someone to repair a Receiver? Plus any good options for new or used ones to buy?
Check https://soundandsecurityexperience.com/ ... ome-audio/ for a new receiver
They can probably advise who services them also
wana-B-racer wrote:For sale
Nakamichi PA 1 (5 Channel Amp) and CA 1 Combo (Control Amp)
791-2345
20211031_182935.jpg
20211031_182823.jpg
20211031_182907.jpg
DVSTT wrote:Afternoon guys, seeking some advice here. I have an old Sony BDVe3100 unit that recently died on me, the specs are as follows;
https://www.sony.com/electronics/suppor ... ifications
I'm currently looking at purchasing this head unit,
https://www.amazon.com/gp/aw/d/B079YW5V ... 0DER&psc=1
Would I be able to power the old Sony speakers from the new head unit if I clip the factory plug connectors, or will this damage the new headunit / old speakers?
vin123 wrote:Hey Tuners,
Hope all is doing well.
I need some direction sourcing this part or advice please.
I purchased a soundbar from PriceM a while aback, model HW-N650 (link included)
https://www.samsung.com/us/televisions- ... w-n650-za/
Since purchasing it was never able to connect via HDMI or Optical but only through BT. After the year of warranty, upon reaching Volume level 50 the subwoofer would power off and PRT would be displayed on the soundbar "screen".
I contacted Samsung but they advised to update the firmware which did not work.
Eventually I carried it to a repair technician and they said that the power board was overheating and recommended sourcing a new one ---> Samsung AH-94-00013R, A9400013R,HW-N650/XU,HWN650XU, Main PCB.
Has anyone experienced similar issues or can you recommend a course of action.
Thanks in advance.
nervewrecker wrote:Hey guys, where repairs harman stuff? need to get the capacitors replaced on mine.
It powers on and cuts off with the standby light just blinking. Started doing that some time now and did some research pin pointing it to that particular issue.
nervewrecker wrote:Hey guys, where repairs harman stuff? need to get the capacitors replaced on mine.
It powers on and cuts off with the standby light just blinking. Started doing that some time now and did some research pin pointing it to that particular issue.
whitters18 wrote:Looking for someone to install a 55"TV in a concrete wall in the POS area. Wall mount already purchased from Pricesmart. Any professionals out there that can help?
Return to “Ole talk and more Ole talk”
Users browsing this forum: No registered users and 136 guests