ok well here we go the equipment used in this project is as follows
Speakers:Supremo 3 way comp set (active)
Ultimo SC 10" subwoofers
Amplifiers:
2 Genesis Dual Mono Extreme
2 Genesis 4 Channel
Processor:Audison Bit One
Wires:Ixos Flat power cables
Ixos 600 series Gamma Geometry Rca
Ixos Insulated Twisted 15ga Speaker Cable
Ixos Fuse Holder ad Fuses
Dampening materials:Second Skin Damplifier Pro
ok well the customer was a DIY kinda person but wanted a custom install to better suit his everyday needs.
main objectives for this build was to maintain original back seat locking position and to keep everything as Stealthy as possible.
Here are some of the pics of the install when the van came by me :
^^^ in the last pic u can see they used some metal brackets to extend the seat forward to accommodate the sub enclosure, this caused some problems for the back seat passengers so the customer requested it to go back to the stock hinging location
well first things first wires were Techflexed and Heat Shrunk.
this was the first try at Techflex and i didnt like how this came out so i did it over and this is the new look
well while we were working on that we also dampened the front doors with second skin Damplifier pro.
we started work on the kick panels and the finishers and mounting baffle for the supremeo 6"
as you can see we just did a simple 3/4" mounting baffle with a rounded over the rear cut out edge
^^ finisher made to hide all the previous cut out holes in the kick panel as well as to bring back the interior as close to stock as possible.
quick pic of the amplifiers
More pics to come tomorrow
by the time can anyone guess where we are going to fit all 4 amplifiers and 2 10" subwoofers
.
