Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

Cifero 200jk parts needed

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
devrat
12 pounds of Boost
Posts: 2250
Joined: October 20th, 2004, 10:23 pm
Location: Te quiero mucho mi bebe
Contact:

Cifero 200jk parts needed

Postby devrat » January 14th, 2011, 7:30 pm

Need to get a steering pump, mounts and cradle bushings.

Can anyone point me in the right direction.

triniringo
3NE 2NR for life
Posts: 224
Joined: October 18th, 2009, 3:25 pm

Re: Cifero 200jk parts needed

Postby triniringo » January 14th, 2011, 8:40 pm

got a steering pump call me 6205199

User avatar
~Vēġó~
3NE 2NR Moderator
Posts: 45606
Joined: April 18th, 2003, 12:18 am
Location: Being the Change that I want to See
Contact:

Re: Cifero 200jk parts needed

Postby ~Vēġó~ » January 14th, 2011, 9:31 pm

you can PM Industrico with your chassis number wrt the mounts........

other than that the mounts you could get at the motorist (marabella or couva)....front mount is like $2400, rear is $1700 and both side mounts a bit over $500 each....

unsure about the cradle bushings....they more than likely would tell you that they don't sell the bushings and that you would need to buy an entire cradle (can't remember the price though....but I'm thinking I paid either $1200 or $2200 for one)

User avatar
~Vēġó~
3NE 2NR Moderator
Posts: 45606
Joined: April 18th, 2003, 12:18 am
Location: Being the Change that I want to See
Contact:

Re: Cifero 200jk parts needed

Postby ~Vēġó~ » January 14th, 2011, 9:36 pm

oh darn, devrat, the prices quoted for the engine mount are for the vq23de/35de motors and NOT the qr20 motor which is for the 200jk....sorry about that.

User avatar
devrat
12 pounds of Boost
Posts: 2250
Joined: October 20th, 2004, 10:23 pm
Location: Te quiero mucho mi bebe
Contact:

Re: Cifero 200jk parts needed

Postby devrat » January 14th, 2011, 10:03 pm

^^^^^Thanks Vega.....the mounts are not very bad but i'll change them anyway as I'm working on the car.

User avatar
~Vēġó~
3NE 2NR Moderator
Posts: 45606
Joined: April 18th, 2003, 12:18 am
Location: Being the Change that I want to See
Contact:

Re: Cifero 200jk parts needed

Postby ~Vēġó~ » January 15th, 2011, 9:47 am

call these people as well......they had many cuts of the J31...

Auto Stock: 655-5331, 390-6318

Located main rd., princes town.....near the wasa sub-station.

Have you called M&N? they usually have oem parts as well......a couple hundred dollars less than massey/motorist.

User avatar
~Vēġó~
3NE 2NR Moderator
Posts: 45606
Joined: April 18th, 2003, 12:18 am
Location: Being the Change that I want to See
Contact:

Re: Cifero 200jk parts needed

Postby ~Vēġó~ » January 17th, 2011, 10:06 pm

what the mechanic say dev???? rack?

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 7 guests