WTk

[X&Y]

jus wanted 2 how 3 10 inch pioneer will sound in a small box becuz i see on the specs sheet is dat it will perform from as small enclosure 0.65 cu ft. Its for a single cab frontier i wanna build it behind the seat and i also wanna port my box or is it wise to go seal.Its not the shallow mount pioneer 10 inch its the normal one please give me some advice plzz tankss

[TEAM ADT]

i really dont think 3 pio tens can fit in that area in a frontier.Try some good 8's a pair will suffice.

[X&Y]

hmm ok tankss well i already hav the 3 pio tens any other advise

[Firewall]

if the mounting depth is sufficient to ensure clearance, check how much cubic ft you can get out of the space and plan accordingly. Use 1 or 2 and sell the other.

[X&Y]

so the better thing is 2 use 2 10 inch becuz the more space it hav the better it will sound i think i'll go with 2 but the enclosure yuh think i should port it or go seal becuz i knw i done lackin space for the ports and a seal box does yuh a stiff bass becuz the frequency is flat and i like my low bass

[Firewall]

measure your dimensions first.
see what is the biggest that could fit without clearance issues
then decide on the number of speakers and type of box

even a single 10 ported will sound loud in a single cab van.

if space is an issue you can always try to see if external circular ports can work

[riadb]

put one 10, get to recommended ported volume. 3 or even 2 wont perform in a ported enclosure with that volume. Remember most recommended volumes are minimal.

[X&Y]

ok tanks fuh the advice