P10/P11/P12 Club

[ruff neck chicken]

what is the oem nissan oil filter number for the sr20ve? thinking about buying a few online but i am getting conflicting part numbers.

[yakuza]

[ruff neck chicken]

i asked because a tuner told me this is what he uses from gspec.



and when searched the forum here i found
15208-65F0C
15208-65F01
15208-65F0A
does the last number/letter create a difference?

i am looking to purchase a set online, any recommendations?

[yakuza]

Those are "hecho en Mexico".

[ruff neck chicken]

found those, thanks.
http://www.frsport.com/Nissan-15208-65F ... 59906.html
http://www.nissanpartszone.com/parts/ni ... 65f0a.html

[outkast]

Looking for some drop low springs for my Primera Wagon. Only problem is 4×4 .so back spring has to be p 10.......

[--=sPIKe=---]

Sup fellaz...lookin for sum help here...I hav a p11 wit the sr18, all of a sudden my fuel pump not getting any current...I checked the fuel pump plug and when I turn on the ignition, no current to the pump...I l9oked on the fuse box in the engine bay area and not seein any fuel pump relays...any1 can advise me on wat to do or a number for an electrician that workin carn8val tues...lol

[Master of Disaster]

What price . car looks good . what type of engine .w11 or

[Master of Disaster]

Try checking the ecu jack .its prob ah little slack ,if not then the signal in the ecu went dead .so you will have to run a direct from the ignition wire ,,,hey there is supposed to be 2 relays by the ecu .check them out

[--=sPIKe=---]

Ok kool....I will check it in the morning...thanx...if not cud I jus tap a wire from the ignition and run it the pump??

[Ted_v2]

Run a direct. Don't tap anything.
If it works well. Then work to suit

[--=sPIKe=---]

Ok...so a direct frm the ignition wire, shud I use a relay?

[Ted_v2]

Direct from battery pole.

[Master of Disaster]

If you can wire it yea why not .

[outkast]

Where you located.it see what parts you got

[Anil_Sooknanan]

The relay for the fuel pump is located behind the driver side kick panel. (the finisher by the accelerator pedal )

[--=sPIKe=---]

Thank u anil...

[Ga15turbo]

hey ppl looking for and AWD p11 to buy can anyone hel me!!!!!!!!!!!!

[Puppetman]

http://www.trinituner.com/v3/forums/viewtopic.php?f=6&t=568488

P11 parts...

[krazykidzkrew]

Yeah fellas. I got a p11 wagon. Sr18de. Wanted to know where the diagnostic port is. I seein a rectangle grey port by the fuse box. But not like a regular port like the obd2 type

[Anil_Sooknanan]

Correct, thats ODB1

[krazykidzkrew]

Ok so how do u go abt checkin that. Cause I got a obd 1 and 2 scan tool but has only obd1 adapters like for gm,ford, toyota, lexus. Is there an adapter selling to the obd2?

[krazykidzkrew]

Ok so I saw an adapter for my scan tool on amazon. Thanks

[krazykidzkrew]

btw the p11 i own now was "--=sPIKe=---" one lol, and do u all have any meets?

[Anil_Sooknanan]

Buy a blatz cable.

[M.E.C.P]

Sup fellas new on the fourums. And i just came into possession of a p11 wagon with the cvt tiptronic tranny.
The person i got it from informed me of an issue with the tranny where it will switch into low gear after the engine ran for a while.
I ran the car and encountered the problem. I have changed, both speed sensors, the drop low resistor, and the tranny altogether. None have rectified my problem.

Is there anyone here to help out fellow p11 tuner. I am goin to have the tps checked and then the ecu for the tranny changed.
Any suggestions or solutions would be appreciated.

Or anyone with an experience like this care to share with me your solution. I am getting frustrated.

I also have the p11 car to the wagon. Sr18 stock. Excellent car. Three years, daily driver, no issues besides routine maintenance.

Thanks in advance to anybody who takes time to respond.

Regards M.E.C.P.

[Anil_Sooknanan]

What engine ?

[M.E.C.P]

Sr20 i believe.

[ivar]

I also having a lil issue with my cvt tranny. it kinda "rock" when i press or release accelerator. i thought was the mount, but it seems good.

[Anil_Sooknanan]

Sr20 i believe.

DE or VE?