wtk: anyone does hardwood flooring

[sc@rf@ce]

need a room 14x14 done in teak
floor will need levelling (plastering) kinda uneven
estimated price (with and without own teak ) and contact info

[sc@rf@ce]

Bump

[OffshoreMarketing]

check yuh pm

[Mark!]

I does give hard wood on the floor... Buh dais about it tho

[triniwildmeat]

Please pm me also...looking for someone to install hardwood floors

[gt4tified]

I had one installed recently...a 15 x 14 bedroom...full teak. If anyone interested, pm me for price and contact.

[gt4tified]

Here's a preliminary pic before the sanding and poly-coating:

[Pablo660]

Fyi teak is real high maintenance so prep for " don't drag or u will scratch it "
Check out agostini interiors for push click pvc floor, I recently installed in my garage

[Pablo660]

But if u want a pro work done check Mr John from ptown

655 3566

Some of his work by me

[Duane 3NE 2NR]

But if u want a pro work done check Mr John from ptown

655 3566

ImageUploadedByTriniTuner1415532715.072992.jpg

Some of his work by me

how much did that staircase cost? Wood and metal work.

[Pablo660]

Well we did the whole house in teak except kitchen n bathrooms so it's kinda hard to estimate just the stairs wood work.
The metal work was about 6g but that was a long time ago from a person who specialize in curve stairs as he built the stairs and railings
He builds awesome curve stairs , his name is Mr Andrew from chaguanas

[Pablo660]

Btw the roman blinds was my DIY lol saved thousands and learn the around a sewing machine also

[Roy15]

Aquarius Building Solutions on Dundonald Street....they have the vinyl planks flooring...water resistant and doesnt scratch easily.....624 9345...think they are on facebook as well...

[shogun]

That metal work on the staircase is pretty good.

[gt4tified]

^^^ It is, but too bad they weren't able to complement the steps with the teak handrail. When yuh could bend teak to make them kinda curves, yuh is ah boss!

[Pablo660]

That was considered but we prefer metal hand railings
but it can be done
I have seen it

[gt4tified]

Yes. We probably did it.

[SNIPER 3000]

Well we did the whole house in teak except kitchen n bathrooms so it's kinda hard to estimate just the stairs wood work.
The metal work was about 6g but that was a long time ago from a person who specialize in curve stairs as he built the stairs and railings
He builds awesome curve stairs , his name is Mr Andrew from chaguanas

Pablo did they float the floor or glued it to the concrete? How has it held up this far? Any advise? Thanks

[SNIPER 3000]

Guys who did the hard wood flooring. Did you use a flooring hammer? If so help me get one locally nah. If no flooring hammer was used, did you just nail on the tounge or screws on the top? Thanks.

[SNIPER 3000]

Here's a preliminary pic before the sanding and poly-coating:ImageUploadedByTriniTuner1415508045.006613.jpg

This is excellent, how many feet apart did you space the sub flooring? One foot? Did you use any glue? Thanks.

[SNIPER 3000]

Here's a preliminary pic before the sanding and poly-coating:ImageUploadedByTriniTuner1415508045.006613.jpg

This is excellent, how many feet apart did you space the sub flooring? One foot? Did you use any glue? Thanks.

[SuperiorMan]

Anyone know where to get some? at a reasonable price.

like looking for things like birch, oak, hickory....things like that.

[ruffneck_12]

so OP


you like the wood hard awa ehehehehehe

pm Pioneer on the forums