HELP NEEDED, vibration on MAZDA 3

triniboythug · Postby **triniboythug** » April 24th, 2015, 1:22 pm

Hey tuners, I have a 2008 Mazda 3 and I've started having this issue when accelorating that am getting a vibration coming through the steering wheel, its not the type you get like if the tyres need speed balancing. To put it as best as I can say is it sounds like 2 heavy pieces of metal vibrating against each other. The steering has no shimming but a constant vibration at any speed. Anyone please !!!

triniboythug · Postby **triniboythug** » April 27th, 2015, 3:45 pm

HELP....... ANYONE !!!!!

pinks · Postby **pinks** » April 27th, 2015, 5:09 pm

Carry d ting by a mechanic to check na bai

dredman1 · Postby **dredman1** » April 27th, 2015, 9:08 pm

Based on the details you gave, first things that come to mind are most likely the transmission and/or engine mounts are busted.

As mentioned however, it would be best to get it checked out by a mechanic to make sure.

Amit · Postby **Amit** » June 14th, 2015, 4:19 pm

check mount next to coolant bottle 1st mount that usually fail

RBphoto · Postby **RBphoto** » August 6th, 2015, 1:15 pm

Could be warped rims

konartis · Postby **konartis** » August 8th, 2015, 6:19 pm

check steering rack ends/tie rods ends, i had that issue in my mzd3 some years ago, when i press brake used to vibrate the steering, nothing on the brake peddle etc. changed the mounts and still had it, then changed out the rack ends and it was fixed, would recommend you go original tho, alot of inferior parts that dont last.

Eagle · Postby **Eagle** » August 8th, 2015, 8:18 pm

I had similar problem and a mechanic said that the axle up does wear and it either need to be change or rebuild.what is ur vehicle mileage.

dredman1 · Postby **dredman1** » October 1st, 2015, 9:23 pm

konartis wrote:check steering rack ends/tie rods ends, i had that issue in my mzd3 some years ago, when i press brake used to vibrate the steering, nothing on the brake peddle etc. changed the mounts and still had it, then changed out the rack ends and it was fixed, would recommend you go original tho, alot of inferior parts that dont last.

Having this issue happening on my MZ3 now. Was it the inner or outer tie rod ends that needed changing, or both?

Postby **art n motion** » November 22nd, 2015, 9:11 am

let your mechanic/suspension person give your vehicle a check....it may be a host of issues or one!

konartis · Postby **konartis** » December 2nd, 2015, 11:07 am

dredman1 wrote:
konartis wrote:check steering rack ends/tie rods ends, i had that issue in my mzd3 some years ago, when i press brake used to vibrate the steering, nothing on the brake peddle etc. changed the mounts and still had it, then changed out the rack ends and it was fixed, would recommend you go original tho, alot of inferior parts that dont last.
Having this issue happening on my MZ3 now. Was it the inner or outer tie rod ends that needed changing, or both?

Was the inner