Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

:: The official TOOLS thread ::

this is how we do it.......

Moderator: 3ne2nr Mods

Post Reply
Chimera
TunerGod
Posts: 20004
Joined: October 11th, 2009, 4:06 pm

Re: :: The official TOOLS thread ::

Postby Chimera » August 18th, 2015, 11:26 am

sooooooo i made the table.....with....1x1 RHS and....18 guage mild steel lol

8x4 table

i eh bother with any of the extra shelf or light or power socket

just end up making a simple 8x4 table


big enough space to do projects

might make a smaller 4x4 table with quarter inch steel to put a vice/for heavy work
Top
User avatar
ADONI
18 pounds of Boost
Posts: 2427
Joined: March 17th, 2008, 1:55 pm
Location: Next Door
Contact:
Contact ADONI

Re: :: The official TOOLS thread ::

Postby ADONI » August 18th, 2015, 9:32 pm

ABA Trading LTD wrote:sooooooo i made the table.....with....1x1 RHS and....18 guage mild steel lol

8x4 table

i eh bother with any of the extra shelf or light or power socket

just end up making a simple 8x4 table


big enough space to do projects

might make a smaller 4x4 table with quarter inch steel to put a vice/for heavy work


My Mom took the table I built for working on and put a table cloth on it... :|
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 18th, 2015, 11:09 pm

RHS is what?
Top
User avatar
black start
TriniTuner 24-7
Posts: 7974
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: :: The official TOOLS thread ::

Postby black start » August 19th, 2015, 12:40 am

Ted_v2 wrote:RHS is what?


Rhs rectangular hollow section...

Square sections them school chair and table make out off...
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 19th, 2015, 12:54 am

So basically a technical name for Square tubing then.
Top
User avatar
Sanctifier
punchin NOS
Posts: 3768
Joined: June 9th, 2004, 8:09 am
Location: Good question!

Re: :: The official TOOLS thread ::

Postby Sanctifier » August 19th, 2015, 3:38 am

ADONI wrote:My Mom took the table I built for working on and put a table cloth on it... :|
^ ^ ^ This!... :lol: :lol: :lol:
Top
User avatar
- Rovin's car audio -
3NE 2NR Power Seller
Posts: 8156
Joined: January 21st, 2006, 9:30 pm
Location: Chaguanas ... Car Audio Solutions
Contact:
Contact - Rovin's car audio -

Re: :: The official TOOLS thread ::

Postby - Rovin's car audio - » August 19th, 2015, 10:43 am

R.H.S = rolled hollow section , steel eh ...
Top
User avatar
black start
TriniTuner 24-7
Posts: 7974
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: :: The official TOOLS thread ::

Postby black start » August 19th, 2015, 1:13 pm

Sanctifier wrote:
ADONI wrote:My Mom took the table I built for working on and put a table cloth on it... :|
^ ^ ^ This!... :lol: :lol: :lol:


:lol:

Sounds about right...
Top
User avatar
Sanctifier
punchin NOS
Posts: 3768
Joined: June 9th, 2004, 8:09 am
Location: Good question!

Re: :: The official TOOLS thread ::

Postby Sanctifier » August 19th, 2015, 5:50 pm

^ ^ ^ Yup, sounds familiar... :lol:
Top
User avatar
*KRONIK*
TriniTuner 24-7
Posts: 9319
Joined: August 5th, 2005, 9:50 am
Location: UP IN DA HEEZY!

Re: :: The official TOOLS thread ::

Postby *KRONIK* » August 20th, 2015, 8:29 am

1440073612931.jpg


EOI

Black and Decker electric driver
Comes with case of 1" and 2" driver bits and an assortment ofhex shank drill bits

Works like new as its only been used a few times.

Charge cycles have been properly maintained.

Asking 200

Pm if interested
Top
User avatar
Rovin
TriniTuner 24-7
Posts: 9609
Joined: January 23rd, 2014, 1:14 pm
Location: In the middle of Chaguanas ...

Re: :: The official TOOLS thread ::

Postby Rovin » August 20th, 2015, 11:15 am

^ i got 1 of those , handle is a tad bit bulky but it works very good for small light duty jobs , for that price u cant wrong ... :)
Top
User avatar
*KRONIK*
TriniTuner 24-7
Posts: 9319
Joined: August 5th, 2005, 9:50 am
Location: UP IN DA HEEZY!

Re: :: The official TOOLS thread ::

Postby *KRONIK* » August 20th, 2015, 11:54 am

It works great
I have used it to assemble complete pre-fab shelving units and even to do minor assembly/disassembly on my car.
Trying to make up some cash for a jigsaw
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 20th, 2015, 12:11 pm

Daz a good item. Ideal for door window repairs and speaker installation
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 20th, 2015, 12:13 pm

I'm looking for some nut drivers tho. For a hex screwdriver.

Hell if I get a 10mm screwdriver I good.
Top
User avatar
*KRONIK*
TriniTuner 24-7
Posts: 9319
Joined: August 5th, 2005, 9:50 am
Location: UP IN DA HEEZY!

Re: :: The official TOOLS thread ::

Postby *KRONIK* » August 20th, 2015, 1:02 pm

1440090054130.jpg


I ordered this today..

I destroyed most of my ph2 philips with my impact driver and these makita gold seem to be the craze these days for impact drivers.

Comes with those nutsetters with hex shank so it can work on a screwdriver also.

Will see how it holds up wen it gets here.
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 20th, 2015, 3:25 pm

how much that impact driver cost ya?
Top
User avatar
striver
Street 2NR
Posts: 98
Joined: April 3rd, 2013, 6:46 pm

Re: :: The official TOOLS thread ::

Postby striver » August 20th, 2015, 10:55 pm

Hey im looking for a set of rethreading taps

Mainly for sump pan drain bolts

Sizes like 14 to 22 mm
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 21st, 2015, 8:57 am

Tool house in Duncan village have a reasonably priced set. Just around 350-400
Top
User avatar
*KRONIK*
TriniTuner 24-7
Posts: 9319
Joined: August 5th, 2005, 9:50 am
Location: UP IN DA HEEZY!

Re: :: The official TOOLS thread ::

Postby *KRONIK* » August 23rd, 2015, 10:49 am

1440341277281.jpg


Benchtop single speed jigsaw
250 with blades
200 without blades
NEG



1440341267701.jpg


Drillmaster 18v drill/driver and worklight combo

650 NEG


PM for info
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 24th, 2015, 6:24 pm

Dansteel has a really nice workshop table for sale. 1k. Top is particle board but can be replaced with construction ply easily. Also saw a black and decker chop saw for 870 brand new there.
Top
User avatar
gastly369
TriniTuner 24-7
Posts: 10467
Joined: May 15th, 2009, 4:40 pm
Location: trinidad

Re: :: The official TOOLS thread ::

Postby gastly369 » August 24th, 2015, 7:31 pm

Ohh fk man... This app and uploading pics :/
Top
User avatar
Duane 3NE 2NR
Admin
Posts: 28736
Joined: March 24th, 2003, 10:27 am
Location: T&T
Contact:
Contact Duane 3NE 2NR

Re: :: The official TOOLS thread ::

Postby Duane 3NE 2NR » August 24th, 2015, 7:36 pm

^ working here

ImageUploadedByTriniTuner1440459304.686255.jpg


Got this about 4 months ago, regular use as a drill and a driver and it seems the battery has not moved from full 3 bars. Insane battery life!!!!
Top
pugboy
TunerGod
Posts: 29324
Joined: September 6th, 2003, 6:18 pm

Re: :: The official TOOLS thread ::

Postby pugboy » August 24th, 2015, 7:48 pm

Yep, brushless motor li-ion batteries ftw
Top
User avatar
cornfused
30 pounds of Boost
Posts: 2547
Joined: May 1st, 2003, 9:09 am
Location: utilizing FIFA rules in small goal

Re: :: The official TOOLS thread ::

Postby cornfused » August 24th, 2015, 7:56 pm

My best friend has that right there uncle Duane , it is a torque master . I go this http://www.amazon.com/Makita-LXFD01-Lithium-battery-Included/dp/B00540B3NE/ref=sr_1_sc_3?ie=UTF8&qid=1440460276&sr=8-3-spell&keywords=makita+18v+idrill

Its also quite good , wood screws be careful it can strip a head easily of not adjusted properly . The head is somewhat bulky for tight spaces . Battery life thus far not really tested , maybe about 30 - 40mins of constant rust removal with a wire brush bit and them some .

Image
Top
User avatar
gastly369
TriniTuner 24-7
Posts: 10467
Joined: May 15th, 2009, 4:40 pm
Location: trinidad

Re: :: The official TOOLS thread ::

Postby gastly369 » August 25th, 2015, 5:49 am

Test
Attachments
1440496167302.jpg
Top
User avatar
- Rovin's car audio -
3NE 2NR Power Seller
Posts: 8156
Joined: January 21st, 2006, 9:30 pm
Location: Chaguanas ... Car Audio Solutions
Contact:
Contact - Rovin's car audio -

Re: :: The official TOOLS thread ::

Postby - Rovin's car audio - » August 25th, 2015, 12:09 pm

klein & irwin - very good stuff dey man .....
Top
Chimera
TunerGod
Posts: 20004
Joined: October 11th, 2009, 4:06 pm

Re: :: The official TOOLS thread ::

Postby Chimera » August 25th, 2015, 1:34 pm

I want a small chainsaw....any suggestions?
Top
User avatar
*KRONIK*
TriniTuner 24-7
Posts: 9319
Joined: August 5th, 2005, 9:50 am
Location: UP IN DA HEEZY!

Re: :: The official TOOLS thread ::

Postby *KRONIK* » August 25th, 2015, 2:05 pm

ABA Trading LTD wrote:I want a small chainsaw....any suggestions?


800

Pm for info
Attachments
1440525954994.jpg
Top
User avatar
X_Factor
TriniTuner 24-7
Posts: 9581
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:
Contact X_Factor

Re: :: The official TOOLS thread ::

Postby X_Factor » August 25th, 2015, 4:41 pm

http://www.amazon.com/gp/product/B000VJ ... PDKIKX0DER

anyone wanna take a chook with me to probably save on shipping?
im estimating that one will cost approx 340.00 give or take a 20.00

I'll be ordering mine by 10pm tonight
reviews are decent and will be used for light to medium work....wont be pounding on it etc...just clamping/holding
Top
User avatar
Ted_v2
TriniTuner 24-7
Posts: 11413
Joined: March 30th, 2010, 8:58 pm

Re: :: The official TOOLS thread ::

Postby Ted_v2 » August 25th, 2015, 5:57 pm

I expect it to cost a lot more than that .
Top
Advertisement
Post Reply

Return to “Ole talk and more Ole talk”

Who is online

Users browsing this forum: GoochMonay, matr1x, pugboy, Shannon and 33 guests

Powered by phpBB® Forum Software © phpBB Limited
GZIP: Off | Load: 3.56