Postby Karim Khan » May 11th, 2014, 11:06 pm
Pioneer i recommend you do the following;
1. Remove lose contaminants
2. Remove bonded contaminants
3. Check thickness of paint
4. Based on paint thickness use the least aggressive method for removing swirls
5. Chose pad and product combo and do a test spot to determine whether or not it is giving you the desired result.
6. Based on the above do the entire car while double checking your work
7. Clean pad or replace worn out pads
8. After removing swirls polish paint to restore luster
9. Apply wax or sealant to paint work
10. Dress trim, tires and clean up glass